General Description

SCI Cell Master™ Creme is a thin alkaline cleaner that does not contain any chlorinated, fluorinated, acetone or methyl ethyl ketone. SCI Cell Master™ Creme is excellent for cleaning water and solvent based inks off vertical equipment, anilox rolls, walls, floors, etc. Apply by wiping or brushing on. After application, the surface should be agitated with a soft bristle brush for metal surface and hard bristle brush for ceramic anilox rolls.

Physical Properties

Appearance: Beige Cream
Odor: Mild
pH(Concentrate): 9.0 - 11.5
Rinsing: Complete
Flash Point: None

Application

Ready to use at room temperature 70°F to 90°F.

Cleaning Instructions

1. Coat the anilox roll 1/16" thick using a paint brush
2. Allow SCI CELLMASTER™ to set on the roll for 30-40 minutes
3. Wipe SCI CELLMASTER™ with clean dry cloth
4. If not clean, repeat the process in areas needed